First we will heat the back of the phone to soften the adhesive that holds the back cover, and to take it off we will use a fine tool to go off all edges.

Remove the two Pentalobe screws (TS1) from the bottom of the phone, before starting to unhook the frame we will remove the tray from the cards, and then with the help of a plastic pick we will unhook all the edges of the frame.

We extract the seven Phillips screws (PH # 00) that hold the antenna module with loudspeaker, and with an opening tool we will unhook it.

We disconnect the interconnection flex and the coaxial cable and take off the vibrator. We extract the two Phillips screws (PH # 00) that hold the plate to the chassis, and we can remove it with the help of a flat opening tool.

To finish we will desoldaremos the damaged vibrator of the auxiliary plate.