To begin with, we apply heat to the back shell, and with the help of one or more plastic spikes we will detach all the edges of the shell, and we will have to detach the rear flash from the shell.

We remove the three Torx screws (T4) that hold the shield and remove it, and we will disconnect the battery to work with greater security.

We remove the three Torx screws (T4) that hold the speaker, and with the help of a flat tool we will unhook it.

We remove the two Torx screws (T4) that hold the antenna, disconnect it from the flex of the charging connector, and with the help of a flat tool we will take it off.

To carry out this step it would not be necessary to remove the motherboard and the battery as we have done.