We started by heating the screen at about 60ºC for about a minute.

Once hot, we introduce a tool between it and the housing and sliding it around the contour, we will take it off.

Remove the two Phillips screws (PH # 00) that hold the shield and remove it to disconnect and remove the screen.

In this step, we remove the nine Phillips screws (PH # 00) that hold the intermediate casing and disengage

To finish, first disconnect the flex that connects the auxiliary board with the motherboard, disconnect the coaxial cable that passes over the module and also disconnect the speaker from the auxiliary board.

Now all we have to do is disengage the module from the chassis.