To remove the case, we will extract the two lower Pentalobe 0.8mm screws (TS1).

To detach the screen, we will introduce an opening tool between it and the frame. It is recommended to heat the screen to soften the adhesive and make it easier to peel it off.

The screen is not very resistant and is very likely to be damaged in the process.

Now, we disconnect the flex from the home button to remove it. We will also extract the SIM / SD tray.

To remove the intermediate housing, we introduce a tool between the frame and the housing to unhook it.

In order to remove the auxiliary plate, we will first disconnect the interconnection flex and the antenna coaxial cable. Then we removed the three Phillips screws (PH # 00) that hold it to the chassis.

We take off the vibrator and the speaker and we can remove the plate with the welded components.

We only have to desolder the vibrator.