We will start by removing the back covers. To do this, we will leverage with an opening tool until they are dislodged.

Remove the screws that hold the casing and disengage.

We disconnect the components of the base plate and remove the adhesives that hold it.

Take off the flash, the side button and the headset.

Remove the SIM / SD tray and lift the plate. Before removing it, we cut the adhesive that holds it.

In this step we disconnect the cameras from the motherboard.

Now we will desoldaremos the headset and the vibrator.

To finish, we desoldamos the flash, the button of the intelligent button and the sensor of proximity.