We will start by removing the back covers. To do this, we will leverage with an opening tool until they are dislodged.

We remove the screws that hold the module and disengage it. We also disconnect the coaxial cable and the interconnection flex.

Remove the screws that hold the auxiliary plate and undo it from the front led flex.

Remove the screws that hold the casing and disengage.

We disconnect the components of the base plate and remove the adhesives that hold it.

Take off the flash, the side button and the headset.

Remove the SIM / SD tray and lift the plate. Before removing it, we cut the adhesive that holds it.

We take off the display flex and heat the screen at about 60 ° C for about a minute.

With the hot screen, we slide a spike around the contour to remove the adhesive that holds it.