Manuales / CAT S61 / Handset | Nadie Me Llama Gallina

CAT S61 - Handset

Guide with all the necessary steps so that you can change the components of the CAT S61 yourself.

Difficulty

TutorialsSmartphonesCaterpillarCAT S61Handset

For this tutorial you will need the following spared parts and tools

Heat-opening thermal mat, CPB320

67,93 €

(A Version) 5 in 1 screwdriver

5,66 €

Opening tool Smartphone, tablet

1,47 €

Set of professional tools for opening smartphones and tablets

17,87 €

Generic earpiece speaker 15.02 x 6.05 x 2.55 mm

0,92 €

Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Back cover

First of all we will apply heat to the back cover, and with the help of a flat opening tool we will gradually take off the entire lid.

Step 2 Back case

We extract the nine Phillips screws (PH # 00) that hold the back shell, and with the help of a fine tool we will unhook the entire back shell.

Step 3 Upper housing

We extract the two Phillips screws (PH # 00) and the Torx screw (T5), and using an opening tool we will disengage the casing.

Step 4 Battery disconnection

We disconnected the battery as a precaution.

Step 5 Trays

We remove the trays for the cards.

Step 6 Components

We disconnect all the components that are connected to the motherboard.

Step 7 Screw

Remove the Phillips screw (PH # 00) that holds the motherboard.

Step 8 Drums

We take off the battery.

Step 9 Motherboard

We extract the motherboard.

Step 10 Handset

Finally, helping us with a fine tool, we will take off the handset that we have to replace.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.

Share this tutorial