CAT S60 - Interconnecting flex with side buttons

Guide with all the necessary steps so that you can change the interconnection flex with side buttons of the CAT S60.

Difficulty
1
2
3
4
5
Ir arriba
TutorialsSmartphonesCaterpillarCAT S60Interconnecting flex with side buttons

For this tutorial you will need the following spared parts and tools

Interconnection flex and side volume buttons for Caterpillar S60
1,61 €
Pinza antiestática curva ESD-15
2,98 €
Screwdriver with 8 heads Peng Fa 7339A
6,96 €
Opening tool Smartphone, tablet
1,47 €
Stripper gun, hot air welder for repairs
15,59 €
Set of professional tools for opening smartphones and tablets
17,87 €
Special SAT 0.70mm PET pick, high friction and resistance
1,30 €
Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Back cover

We apply heat to the back shell and we are taking off the shell with the help of some opening tool.

Step 2 Back case

Remove the 9 Phillips screws (PH # 00) that hold the rear case.

Step 3 Intermediate housing

Remove the 2 Phillips screws (PH # 00), disconnect the flex from the battery and detach the components that are glued to the housing.

Step 4 Components

We disconnect and remove the components of the motherboard.

Step 5 Components

Remove and disconnect the components of the motherboard.

Step 6 Motherboard

Remove the Phillip screws (PH # 00) that hold the motherboard.

Step 7 Speaker, auxiliary board and battery

We disconnect the loudspeaker, take it off, remove the antenna module, disconnect the coaxial cable and the interconnection flex from the auxiliary plate and remove it, and we will also take off the battery.

Step 8 Interconnecting flex with side buttons

We remove the screws and take off the flex that we are going to change.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial
Keywords: