CAT S60 - Thermal camera connector

Guide with all the necessary steps so that you can change the thermal camera of the CAT S60 yourself.

Difficulty
1
2
3
4
5
Ir arriba
TutorialsSmartphonesCaterpillarCAT S60Thermal camera connector

For this tutorial you will need the following spared parts and tools

Screwdriver with 8 heads Peng Fa 7339A
6,96 €
Opening tool Smartphone, tablet
1,47 €
Stripper gun, hot air welder for repairs
15,59 €
Special SAT 0.70mm PET pick, high friction and resistance
1,30 €
Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Back cover

We apply heat to the back shell and we are taking off the shell with the help of some opening tool.

Step 2 Back case

Remove the 9 Phillips screws (PH # 00) that hold the rear case.

Step 3 Intermediate housing

Remove the 2 Phillips screws (PH # 00), disconnect the flex from the battery and detach the components that are glued to the housing.

Step 4 Components

We disconnect and remove the components of the motherboard.

Step 5 Components

Remove and disconnect the components of the motherboard.

Step 6 Motherboard

Remove the Phillip screws (PH # 00) that hold the motherboard.

Step 7 Thermal camera connector

We disconnect the connector that we are going to change from the motherboard.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial
Keywords: