CAT S50 - Speaker

Guide with all the steps necessary for you to change the speaker of the Caterpillar S50 yourself.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 Caterpillar S50

Characteristics:

Dimensions: 77 x 144.5 x 12.7 mm

Weight: 185 g

SoC: Qualcomm Snapdragon 400 MSM8926

Processor: ARM Cortex-A7, 1200 MHz, Number of cores: 4

Graphics processor: Qualcomm Adreno 305, Number of cores: 1

RAM memory: 2 GB

Internal memory: 8 GB

Memory cards: microSD, microSDHC, microSDXC

Display: 4.7 in., LCD, 720 x 1280 pixels, 24 bit.

Battery: 2630 mAh, Li-ion (lithium ion)

Operating system : Android 4.4.2 KitKat

Camera: 3200 x 2400 pixels, 1920 x 1080 pixels, 30 fps

SIM card: Micro-SIM

Wi-Fi: b, g, n, n 5GHz, Wi-Fi Hotspot

USB: 2.0, Micro USB

Bluetooth: 4.0

Location / Navigation: GPS, A-GPS, GLONASS

Step 2 SIM and microSD cards

We will start by removing the SIM and micro SD cards. To do this, we will open the side cover that covers them and press them to be ejected.

Step 3 Side trims

To get inside the phone, we have to remove the side covers that hold the case. To do this, remove the ten hexagonal screws and disengage them.

Step 4 Back case

In order to remove the back cover, we will have to unhook the fastening tabs and then disengage it from the front casing / chassis.

Step 5 Speaker

In the back housing, we will find the speaker embedded. We will use a curved spike to make sure we hook it underneath before lifting it.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial