We will start by removing the back cover. To do this we will use a spike, which we will move along the contour of the phone to release the notches that hold it.

We will move the tine carefully so as not to damage the plastic tabs of the lid.

To remove this case, first remove the eight Phillips screws (PH # 00) that hold it to the chassis. Once the screws are removed, we will use a flat tool to release it.

To finish, we will disconnect the battery and then take it off using the plastic tab that comes with this function.

First we remove the coaxial cable that passes over the screws. To do this, we will disconnect it from the motherboard and disengage it.

We will remove the screws of the loudspeaker module and the clamping part of the side buttons. Now we can disengage the module.

To finish, we will disconnect the flex from side buttons of the base plate and then disengage the metal part where they are stuck. It only remains to take off the flex.