We will start by removing the back cover, it may seem that it does not, but it has a lid. For this we will use an opening tool, which we will move along the contour of the phone to release the notches that hold it.

To remove this case, first remove the ten Phillips screws (PH # 00) that hold it to the chassis. Once the screws are removed, we will use a flat tool to release it.

In this step we begin to disconnect the components to be able to remove the base plate later. We disconnect the cameras, the flex of the digitizer, the flex of the display, the connection cable of the auxiliary board with the motherboard and the battery

Now, to remove the motherboard, first remove the two Phillips screws (PH # 00) that hold it. Before removing the motherboard, we will have to remove the trays for SIM and SD cards.

Now we can undo the motherboard. Then we will take off the battery, pulling the plastic tab that it brings.

To finish, we remove the screw that holds the flex support and remove it. It only remains to take off the flex support.