Manuales / Blackview BV5800 / Secondary rear camera and rear flash

Blackview BV5800 - Secondary rear camera and rear flash

Guide with all the necessary steps so that you can change the components of the Blackview BV5800 yourself.

Difficulty

TutorialsSmartphonesBlackviewBlackview BV5800Secondary rear camera and rear flash

For this tutorial you will need the following spared parts and tools

Heat-opening thermal mat, CPB320

69,61 €

Opening tool Smartphone, tablet

2,19 €

Pinza antiestática ESD redondeada

3,06 €

Set of professional tools for opening smartphones and tablets

18,97 €

Special SAT 0.75mm high friction PVC pick

1,07 €

PREMIUM screwdriver with 24 magnetic replacement bits

10,41 €

Antistatic and ESD tactile glove, size S

5,30 €

Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Take off screen

We started by heating the screen at about 65 ° C for about a minute, to soften the adhesive. Then, with the hot screen, we introduce a flat tool between it and the casing, sliding it around the contour, to detach it.

Step 2 Remove screen

We remove the Phillips screw (PH # 00) that holds the connector cover of the screen to disconnect it.

Step 3 Remove internal casing

We remove the eleven Phillips screws (PH # 00) that hold the internal casing and disengage it.

Step 4 Disconnect components

We disconnect the components of the motherboard and remove the SIM / SD tray.

Step 5 Secondary rear camera and rear flash

We lift the base plate together with the plastic housing that is underneath. On the other side, we will find the rear camera. We just have to disconnect it and take it off.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.

Share this tutorial