With a flat tool or directly with your hands, unhook the back cover of the chassis.
Step 2 Remove battery
Lever with a tool or directly with your hands, we will remove the battery.
Step 3 Remove internal casing
Remove the fourteen Phillips screws (PH # 00) that hold the housing to the chassis and unhook it by prying it off.
Step 4 Disconnect components
We disconnect the components of the plate to be able to later remove it.
Step 5 Removing the motherboard
Remove the four Phillips screws (PH # 00) that hold the motherboard and lift it slightly to disengage the headset.
You have to take off the receiver with care because if you do not split in two.
Step 6 Remove components
Remove the stickers that cover the chassis and desoldamos the vibrator and the lower microphone. We will also detach the flex cables from the chassis screen.
Step 7 Fullscreen
We heat the screen at about 65 ° C for about a minute to soften the adhesive. With the hot screen, we slide an opening tool between it and the frame to detach it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.