First of all we must remove the tray from the cards.
Step 2 Back case
Remove the two Torx screws (T3) that hold the back shell, and with the help of a tool we will unhook all the edges of the casing.
Step 3 Speaker module with vibrator
We extract the seven Phillips screws (PH # 00) that hold the module and with a flat tool we will unhook it.
Step 4 Auxiliary plate
We disconnected the interconnection flex, the fingerprint reader, the coaxial cable, and we can unhook the auxiliary plate.
Step 5 Fingerprint reader
Finally we remove the fingerprint reader that we are going to change.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.