We will start by taking the screen. To do this, first remove the two Pentalobe 0.8 screws (TS1) that hold the screen to the housing.

Then, using a suction cup, we will make room to introduce a flat tool and remove the strip of adhesive that holds it.

Now we will have to remove the shielding from the connectors on the motherboard. For this we will remove the five Triwing screws (Y0.6) that hold it.

Once the shield has been removed, we will disconnect the flexes from the screen and the headset.

To finish, remove the three Triwing screws (Y0.6) and take off the flex and components of the screen.