We extract the two Pentalobe screws (TS1) apply a little heat with a hot air gun, and with the help of suction cups we will separate the screen from the chassis with the help of a pick as well.
Step 2 Screen Flex
Remove the shield that is on top of the connectors, for this we must remove the three screws Triwing (Y0.6) and the Phillips screw (PH # 00) that holds the shield, and we can disconnect the flex from the screen and the headset module.
Step 3 Bottom shields
We extract the four Phillips screws (PH # 00) and the Triwing screw (Y0.6) that hold the lower bindajes that we need to remove.
Step 4 Speaker
Remove the four Phillips screws (PH # 00) and the three standoff, disconnect the speaker connector and we can remove it.
Step 5 Vibrator
We disconnect the flex from the vibrator, and we can remove it.
Step 6 Drums
Take off the battery using the adhesive strips that are below the battery.
Step 7 Front cameras
We disconnect the flexes from the cameras and we can remove the cameras that we have to replace.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.