Remove the two 3.6mm Pentalobe screws with the appropriate screwdriver.

Make sure the terminal is off.

Hold the screen with a suction cup, just above the home button.

With an opening tool, push the chassis down while pulling the suction cup in the opposite direction.

It must do some strength and persist because in this model is quite tight.

The screen is still held by the flex cables of the digitizer and display. Handle with care not to damage these cables.

Remove the metal shield covering the connectors. It is held by 3 Phillips screws.

Disconnect the 3 flex cables and separate the screen.

Remove the 2 Phillips 1.3mm screws.

Take off by carefully pulling the home button with its metal shield.

To remove the metal shield button, we recommend using a S @ T spike.

Once the support is removed with the button, the key will simply be pressed out.