First, we will remove the two Pentalobe screws (TS1) that all iPhone have in the lower area, we will apply heat to the screen to soften the adhesive that holds it, and with the help of a suction cup and a fine tool we will take off all the edges from the screen.

We remove the Triwing screw (Y0.6) that holds the shield that covers the battery connector in order to disconnect it, and then we will remove the five Triwing screws (Y0.6) that hold the upper shield.

We disconnect the components that connect the screen to the motherboard.

We extract the 2 Phillips screws (PH # 00) and the other two Triwing (Y0.6) that hold the headset and other components, and with the help of tweezers we will take off the flex.