First, we apply heat to the terminal on the screen part to soften the adhesive and be able to separate them.

Next we extract the two Pentalobe type screws (TS1) and with the help of suction cups and a fine opening tool we separate the screen from the terminal until it is detached from the chassis

We remove the Triwing screws (Y0.6) from both shields that are shown in the first photo of this step and remove them.

Now we disconnect the battery and the flexes that join the screen to the terminal chassis in order to separate them.

We extract the four Triwing screws (Y0.6) then we remove the shields we remove the sim tray and we can remove the reader from its housing.

Next, we release the vibrator connection and remove the three screws, one Phillips type (PH # 00) and one Standoff type, once removed we can extract the vibrator from its housing.