To begin, we must remove the two Pentalobe 0.8 (TS1) screws from the bottom of the housing, apply some heat to soften the adhesive, and with the help of a tool with suction cups we will take off the chassis screen.

We disconnect the battery connector to work with greater safety.

We remove the five Triwing screws (Y0.6) that hold the shield, and once removed we can disconnect the flex from the screen and the headset module.

Remove the two Phillips screws (PH # 00) that hold the shield that covers the rear cameras and unhook it, disconnect the rear cameras and also remove them.

And now we can disconnect the damaged front cameras and remove them.