We introduce with great care, a pick inside the back cover. If necessary, to facilitate this action, we can apply a little heat, so that the glue softens and it is easier to introduce the barb.

Unscrew the screws and with a slight lever remove the intermediate housing.

We release the screws that cover the plate that protects the flex from the battery. If necessary, we can remove the fingerprint reader.

We disconnect the flex that connects the battery to the board. And with great care, we will remove the battery, introducing a plastic tool for professional opening.

We remove the fingerprint reader, disconnect the flex from the side button.

Remove, with a slight lever, the upper trim.

We disconnect the remaining flexes, completely freeing the motherboard. Making a slight lever, remove the motherboard.

We will carefully remove the handset with a curved tip tool.

We remove the coaxial cable from the auxiliary plate.

With a soldering iron, we desoldamos the vibrator of the auxiliary plate.

Take off, very carefully the auxiliary screen plate, leaving it free.