Make sure the computer is turned off before you start.

Eject the SIM card by pressing it until you hear "click".

Remove the Phillips screw located next to the USB charging connector.

Separate the cover little by little with a prong all around.

Remove the back cover.

To remove the rear camera, disconnect it from the motherboard and pull it out gently.

Remove the metal shield covering the connectors.

Disconnect the data cable from the display. Remove the Phillips screw that is underneath.

Disconnect the coaxial cable.

Disconnect the flex cable from side keys.

Pull the plate away from the top to gain access to the connectors.

Remove the protective plastic and disconnect the battery cable.

Disconnect the connector on the bottom flex to separate the base plate.

Unplug the flex from the motherboard by pulling on the tab of the connector and pulling gently.

Peel off the sensor and pull the antenna module to detach it from the motherboard.

Separate the flex with the proximity sensor of the antenna module.