Manuales / Alcatel Idol 4 / Charge connector

Alcatel Idol 4 - Charge connector

Guide with all the necessary steps for you to change the charging connector of the Alcatel Idol 4 yourself.

Difficulty

TutorialsSmartphonesAlcatelAlcatel Idol 4Charge connector

For this tutorial you will need the following spared parts and tools

Flex with microUSB charging connector for Alcatel Idol 4, 6055K / Blackberry DTEK50, STH100-2

3,14 €

Heat-opening thermal mat, CPB320

67,93 €

(A Version) 5 in 1 screwdriver

5,66 €

Double SMD soldering station, Baku 878

53,81 €

Professional disassembly spatula for mobile phones and smartphones

2,81 €

Opening tool Smartphone, tablet

1,47 €

Electroestatic free Twezeers. (Model ESD-11)

3,20 €

Special SAT 0.70mm PET pick, high friction and resistance

1,30 €

Touch ESD glove, for antistatic protection, size M

2,37 €

Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Back cover

We start by heating the back cover at about 60 ° C for about a minute to soften the adhesive. Once hot, we will slide an opening tool between it and the frame to take it off.

Step 2 Remove speaker module and antenna

In order to remove the lower module, we remove the five Phillips screws (PH # 00) and disengage it.

Step 3 Remove charging connector

Remove the three Phillips screws (PH # 00) that hold the shield covering the flex connector. We remove the armor, disconnect the flex from the base plate and then detach it from the chassis.

Step 4 Charge connector

To finish, we will desoldaremos the vibrator of the flex.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.

Share this tutorial