We will use the extraction tool to remove the SIM tray. Later, with the help of a plastic tool, we will press to release the tabs that join the back cover to the length of the screen. Finally we will take off the fingerprint reader from the back cover to be able to separate it from the screen.

We extract the eleven Phillips screws (PH # 00), which hold the intermediate casing that covers the motherboard area, and with the help of a flat tool we will unhook it.

We disconnect the battery to work with greater safety.

We disconnect the flex from the fingerprint reader button

We remove the rear depth camera and the main camera

We disconnect the flex from the screen and the coaxial antenna cable from the motherboard. Using a flat tool we lift the base plate and extract it

With the help of tweezers we take off the flex of the google assistant from the side frame and the screen chassis

Helping us with tweezers we proceed to take off the volume and power flex from the side frame and the screen chassis

We take off the earphone speaker being careful not to damage it

We will use a syringe to inject a small amount of isopropyl alcohol and be able to take off the battery from the screen chassis more easily with the help of a metal spatula.

We extract the eight Phillips screws (PH # 00) that hold the speaker, and with a flat tool we will remove it.

We disconnect the flex and the antenna cable connected to the auxiliary plate. Later, with the help of a plastic tool, we extract the auxiliary plate

We remove the previously disconnected coaxial antenna cable and with the help of a metal spatula we take off the vibrator.

And we would already have our screen without components