Guide with all the necessary steps so that you can change the LEDs of the upper casing of the Smart Balance Wheel yourself.
Characteristics:
Voltage: 36V.
Weight: 13Kg.
Max Speed: 10 Km / h.
!How fast!
We will start by removing the eight Phillips screws (PH # 2) that hold the lower part of the housing where the scooter's charging connector is located.
In order to remove the housing, we will disconnect the led lights cables and we can remove them.
Now we will remove the six Phillips screws (PH # 2) that hold the housing to the chassis and disconnect the cables from the LEDs of the housing.
When removing the case, we will be careful with the cables, which will slide through the hole in the chassis.
In the lower part of the housing we will find a small plate in which the upper central LEDs are located.
To remove the LEDs that are on top of the wheels, we will have to remove the plastic that covers them. For this we will unhook the notches that hold the piece to the casing. Then we will take off the strip of leds from the shell and slide it through the hole in it.
