Guide with all the necessary steps so that you can change the flex with microphone of the Pebble Time.
With the help of an opening tool we push the metal pin that is under the strap and unhook it.
We apply heat to the window with a heat blanket or a hot air gun, once the glue is already hot we will introduce a plastic spike to take off the window.
With the help of a plastic opening tool we lift and disconnect the LCD screen.
Remove all the Phillips screws (PH # 00) that hold the plate, disconnect the microphone flex and remove the screw under the flex, and remove the plate.
Take off the battery to be replaced with the help of a plastic opening tool.
Remove the Phillips screws (PH # 00), with a metal opening tool with a curved tip, remove the sheet that protects the microphone and with a metal prong take off the flex of the smasrtwatch housing.
To desoldar the vibrator with a greater comfort, we have taped the flex to the table, and with a welder we desoldado the vibraodor to re-weld to the new flex.
