We will start by removing the four Torx T4 screws that hold the rear case.
Step 2 Take off the back cover
After removing the screws we will have to take off the vibrator, which is glued to the plate and the back shell, before removing it.
Step 3 Remove inner casing
First we will remove the insulating rubber to avoid losing it or damaging it.
Then we will undo the inner casing, very carefully since this is very weak.
Step 4 screen
To take off the screen we will have to heat it until it melts and falls or pry with any tool, whether plastic or metallic. Most likely, the screen ends broken or the housing damaged, so we do not recommend replacing it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.