To remove the battery, open the lid and taking advantage of the adhesive that it brings for this purpose, pull it to remove it.

To remove the front cover, we will use an opening tool to detach the screen and separate it from the back cover.

First we remove the four Torx T4 screws. To remove the plate we will first separate the side of the connectors since these are fitted in the housing.

With the plate almost out, we can only disconnect the flex from the side buttons and microphone.

To remove this metallic chassis we must first remove the two Torx T4 screws that we will find hidden in one of the sides. After removing the screws we will remove the adhesives.

We remove the plastic from the led light to be able to remove the chassis easily.

All that remains is to take off the speaker from the side of the rear case.