With a fine tool we move the metal tab to extract the straps and leave the smartwatch free

We apply heat on the side of the lcd and with a fine plastic tool so as not to damage any component we are taking it off all around until it is separated from the chassis

With the help of a Phillips-type screwdriver (PH # 00) we extract the three screws that hold the shield and then remove the shield to release the screen connector

With the help of a thin plastic tool we disconnect the felx from the screen from its housing in order to free it.

With the help of some tweezers we lift the adhesive that joins the battery with the motherboard and we remove it, then we extract the Phillips type fixing screw (PH # 00) that holds the motherboard to the chassis and we remove it as well as the small shield

We release the connection on the motherboard with the help of a fine plastic tool, then lift the motherboard from its housing and extract it

We extract the two Phillips type screws (PH # 00) that hold the shield to the chassis and remove it with the help of tweezers

With a thin plastic tool, we release the battery connector from its place and lift it little by little until it is removed from its housing