First we must remove the card tray.

With the help of a fine tool we will unhook all the edges of the back cover.

We remove the nine Phillips screws (PH # 00) that hold the intermediate housing, and with the help of a flat tool we will unhook it.

We disconnect the battery to work with greater security.

We remove the seven Phillips screws (PH # 00) that hold the speaker module, and with the help of a flat tool we will unhook it.

Finally, we will disconnect the flex bridge and the coaxial cable, take off the adhesive that is above the plate and the vibrator, remove the Phillips screw (PH # 00) that holds the plate, and with the help of a flat tool the we will withdraw.