We remove the SIM card compartment, with a SIM removal tool.

We apply heat to soften the glue, and carefully introduce a plastic spike to separate the back shell. When we have it detached, we will separate it with care, since it has a flex connected to the base plate and could break if we pull hard.

Remove the screws that hold the intermediate housing. And prying with an opening tool we will separate the intermediate casing.

We disconnect the flex from the front camera of the motherboard and remove it.

We remove, prying, the antenna connector.

We disconnected the front camera, the interconnection flex, the screen flex from the motherboard and the coaxial cable.

Levering with a plastic tool, remove the base plate.

We will remove the plastic cover that covers the push buttons.

We take off the flex of the shell. And finally, very carefully, we carefully take off the side buttons of the housing and remove them.

We disconnected the interconnection flex and disconnected and removed the coaxial cable. Pulling out the auxiliary plate.

Pulling the vibrator away. And with the same method we remove the speaker.

Pulling the receiver off.