To start we remove the strap to work with greater comfort.

We apply heat to the screen, and with a thin tool we will peel off the edges of the chassis screen.

We remove the adhesive covering the screen connectors, disconnect them, remove the Triwing screw (Y0.6), and disconnect the force touch sensor connector, and take it off the chassis.

We remove the Triwing screw (Y0.6) and take off the armor that we indicated in the second photograph, with the help of a flat tool, we will take off the battery carefully, and we will have to remove another screw like the previous one and its corresponding shield, which protects the battery connector, we disconnect the connector, and we can remove the battery.

Remove the three Triwing screws (Y0.6), remove the shield, and disconnect the flex that joins the motherboard with the vibrator, and with the help of a flat tool we will take off the vibrator.

We disconnect the interconnection flex that connected the motherboard with the vibrator, we will remove the three Triwing screws (Y0.6) that hold the speaker, disconnect it, and with the help of flat tweezers we will take off the speaker.

We remove all Triwing screws (Y0.6) and remove the stickers that prevent us from seeing the screws.

We remove the four Triwing screws (Y0.6) and the two shields that hold the motherboard, with the help of tweezers we will lift it carefully, since we have to disconnect a flex that connects it with the back cover.

We remove the two Triwing screws (Y0.6) that hold the button.

With the help of tweezers we will take off the flex with the side button and the microphone.

And finally we will take off the back cover with wireless charging of the frame that we are going to replace.