Guide with all the necessary steps so that you can change the components of the Samsung Galaxy Tab S3 yourself.
We start by removing the back cover which is attached. To detach it, we will heat it to about 60ºC during a minute approximately, thus we will soften the adhesive.
With the hot lid we introduce an opening tool and slide it around the contour to separate it from the chassis. We will take care not to insert the tool much so as not to damage the flex cables, especially on the right side seen from behind.
Now we will perform the same process to take off the screen. We will heat it to about 60ºC for about a minute.
With the hot screen, we introduce an opening tool and slide it around the contour to separate it from the chassis. We will avoid the left side of the screen, which is where the flex cables of the screen are located.