We will start by removing the SIM and MicroSD cards. For this we will open the lid, press the card and it will be ejected.

Once the cards are removed, we will proceed to remove the back cover. To do this we will introduce an opening tool between the frame and the screen and doing lever movements, we will unhook the casing.

We will disconnect the flex from the screen of the motherboard to be able to remove it later.

Now we will heat the screen, using a heat gun or other tools to heat, to soften the glue.

With the help of a pick or other opening tool, we will take off the screen of the chassis introducing this between the screen and the chassis.

The screen is also attached to the center so we will need a longer tool to take off the glue from that area.

We already have the screen outside.