Before starting, make sure the tablet is off.

The back cover is easily removed. We recommend the special opening tool, since it allows you to disassemble the lid without damaging it or scratching it.

Go around the entire contour with this tool that resembles a "pizza cutter" and separate the back cover.

Disconnect the data flex from the touch screen on the motherboard. To do this, press the connector tab and pull gently.

We recommend heating the glass to 60º C to soften the glue.

Insert the tip of the prong between the glass and the plastic frame.

While holding the screen with a suction cup, run the contour with the prong to detach the adhesive.

Avoid cutting the data flex with the tine.

Finally, separate the touch screen, starting from the side opposite the data flex so as not to damage the data flex.