Manuales / Huawei MediaPad T1 8.0 / Motherboard

Huawei MediaPad T1 8.0 - Motherboard

Guide with all the steps necessary for you to change the Huawei MediaPad T1 8.0 motherboard yourself.

Difficulty

TutorialsTabletsHuaweiHuawei MediaPad T1 8.0Motherboard

For this tutorial you will need the following spared parts and tools

Professional Double Plastic Device Opening Tool

1,52 €

Professional disassembly spatula for mobile phones and smartphones

2,71 €

Opening tool Smartphone, tablet

2,19 €

Kit of tools profesional 70 in 1 - ARTICLE NUMBER: LSP031634

16,67 €

Anti-static tweezer tips VETUS ESD-259A

5,69 €

Touch ESD glove, for antistatic protection, size M

4,16 €

Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Huawei MediaPad T1 8.0

Dimensions : 210.6 x 127.7 x 7.9 mm Weight: 360 g

SoC : Qualcomm Snapdragon 200 MSM8212

Processor : ARM Cortex-A7, 1200 MHz, Number of cores: 4

Graphic processor: Qualcomm Adreno 302

RAM memory: 1 GB

Internal memory: 8 GB, 16 GB

Memory cards: microSD, microSDHC, microSDXC

Display : 8 in, IPS, 1280 x 800 pixels, 24 bit

Battery : 4800 mAh, Li-Polymer (polymer lithium ion)

Operating system: Android 4.3 Jelly Bean

Camera : 2592 x 1944 pixels, 1280 x 720 pixels, 30 fps

SIM card : Micro-SIM

Wi-Fi: b, g, n, Wi-Fi Hotspot, Wi-Fi Direct USB: 2.0, Micro USB

Bluetooth : 4.0

Location / Navigation: GPS, A-GPS, GLONASS

Before starting, make sure that the equipment is turned off.

Step 2 SD card

First, we must remove the card, after a small lid located on the side.

Step 3 Screw

Remove the screw, covered by the warranty seal, located next to the SD card slot.

The screw is Phillips (PH # 00).

Step 4

We remove the back cover by inserting a plastic opening tool and gently prying it all the way around.

Step 5 screen

To separate the screen we must disconnect the data flex from the motherboard, by actuating the tab of the connector and pulling gently.

Step 6 Bottom module

Remove the 5 Torx # 4 screws indicated in the image.

Step 7

Unplug the flex from the motherboard, by pulling on the tab of the connector and pulling gently.

Step 8 Speaker

Separate the lower module with loudspeaker and antenna, prying it gently with an opening tool.

Step 9 Motherboard

Remove the 5 screws

Remove the metal shields from the battery and USB connectors.

Step 10

Disconnect the battery in the motherboard.

Separate the base plate by gently prying with the opening tool.

Use antistatic protection to manipulate the base plate with your hands.

Step 11 Motherboard

Finally, disconnect the front camera from the motherboard.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.

Share this tutorial