Specifications

Dimensions : 248.5 x 150 x 82 mm

Weight : 433 g

SoC : Qualcomm Snapdragon 410 MSM8916

Processor : ARM Cortex-453, 1200 MHz, Number of cores: 4

Graphics processor : Qualcomm Adreno 306, 400 MHz

RAM memory : 1 GB, 533 MHz

Internal memory : 8 GB

Memory cards: microSD, microSDHC

Display: 9.6 in, IPS, 1280 x 800 pixels, 24 bit

Battery : 4800 mAh, Li-Polymer (polymer lithium ion)

Operating system : Android 4.4.4 KitKat

Camera: 2560 x 1920 pixels, 1280 x 720 pixels, 30 fps

SIM card: Micro-SIM

Wi-Fi: a, b, g, n, n 5GHz, Dual band, Wi-Fi Direct

USB: 2.0, Micro USB

Bluetooth: 4.0

Location / Navigation: GPS, A-GPS, GLONASS, Beidou

Before starting make sure the tablet is off.

Remove the SD card.

Remove the Phillips screw, hidden behind the warranty seal.

Use a tablet-opening tool to release the plastic hooks and separate the back cover from the screen.

Both parts will remain connected by the display flex.

Unplug the flex from the screen on the motherboard to separate it.

Remove the screws that hold the speaker module, 3 of them Torx (Red) and 1 Phillips (Brown).

Unplug the flex from the base plate, by pulling on the tab of the connector and pulling gently.

Finally, unhook the speaker module from the housing.