To begin with we must remove the tray to start unhooking the back cover.

Unhook the back cover of the screen, but we will open it carefully as you have to remove 2 Phillips screws (PH # 00) that hold the shield that protect the connector from the screen. Once we remove the shielding, we can disconnect the flex from the screen.

We remove the Torx screw (T4) and the Phillips screw (PH # 00) that hold the shield and extract it.

Remove the other 2 Torx screws (T4) that hold the speaker, and we can unhook it.

Unhook the audio connector, disconnect the flex and take off the side buttons, so we can remove the flex completely, and finally, with the help of a pair of tweezers we will also remove the side keys.