We will start by removing the back cover. To do this, we will use an opening tool to pry and release it from the notches that hold it.

In this step we remove the adhesive that is on top of the battery to be able to disconnect and remove the cameras and the interconnection flex.

Now we take off the antenna, the battery, the push buttons and the speakers.

We disconnect the touch screen and disengage the microphone. Now we can remove the three Phillips screws (PH # 00) that hold the plate and remove all the components still connected.

To finish, we remove the screws that "hold" the display and remove it. In our case, the couplings fell on their own even with the screw in place.