Energy Sistem Neo 3 Lite - Scanner

Guide with all the necessary steps so that you can change the digitizer of the Energy Sistem Neo 3 Lite tablet.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 characteristics

SCREEN

  • TN 10.1 "screen
  • Pan 16: 9
  • Resolution 1024 x 2600 pixels

PROCESSOR

  • Four-core processor ARtvl Cortex A7 1.3GHz

OS

  • Android 5.1 Lollipop Version

MEMORY

  • 1GB DDR3 RAM
  • 8GB of internal memory expandable by microSD-HCOCC cards (up to 128 GB).

CAMERAS

  • 2Mpx rear camera with flash
  • VGA front camera with flash

BATTERY

  • Autonomy: up to 5 hours of Wi-Fi browsing.
  • Battery capacity: 3000 mAh

CONNECTIONS

  • WI-FI N: medulo1332.11 big / n.
  • Bluetooth 4.0
  • USB-Host function
  • USB-OTG function

Step 2 Memory card and back cover

Remove the memory card we have in the tablet, and with the help of a plastic prong unhook all the edges of the case.

Step 3 Components

Remove the stickers that bother us, disconnect the LCD and the digitized from the motherboard, take off the WIFI antenna, and lift the microphone.

Step 4 Screws and cameras

Remove the 3 Phillips screws (PH # 00) and take off the rear camera that is attached to the LCD screen.

Step 5 Battery

We take off the battery, and once it has been removed we can remove the battery together with the motherboard and other components.

Step 6 Scanner

We apply heat with a heating mantle and with a metallic pick we are taking off the digitizer to replace.

CAREFULLY READ THE INSTRUCTIONS FOR USE OF THE CALORIFICATION BLANKET.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial