We will start by removing the microSD card. For this we will press it so that it is expelled.

We will open the back shell using an opening tool, which we will slide between it and the frame to unhook the notches that hold it.

We will proceed to remove the motherboard. For this we will disconnect the components connected to it. In this step, we disconnected the flex from the side buttons, the flex from the ignition button and disconnected the right speaker.

Now we will disconnect the flex from the touch screen and the LCD display. To do this we will lift the fastening tabs that bring the connectors and gently pull them.

In this step we will disconnect the battery, the interconnection flex and remove the seven Phillips screws (PH # 00) that hold it.

Before removing the base plate we will remove the rear camera from the frame and remove both cameras.