Before starting make sure the tablet is off.

Remove the 2 Phillips screws that hold the housing.

Disassemble the back cover by holding the screen with the suction cup and helping with the double opening tool.

Remove the adhesives that cover the connectors on the plate.

Disconnect the flex cable from the camera, by pulling on the tab of the connector and pulling gently on it.

Remove the camera behind the cables that join the plates. We will thus avoid damaging the flex with the soldering iron.

Peel off the plate, held by 2 Phillips screws.

Unsolder the 3 cables that join the plates, applying heat with the tip of the soldering iron while gently pulling the cable.