To start we must apply heat to the screen, for this we have used a thermal mat, and we have taken off all the edges of the screen with a plastic pick, and when we have already been able to lift the screen, we have verified that both in the upper part and in the lower one, the screen is connected to the motherboard by means of several flexes.

We remove the two Phillips screws (PH # 00) that hold the shield, and with the help of a flat tool we will disconnect the connectors.

We extract the two Phillips screws (PH # 00) that hold the upper shield, and with the help of a flat tip tool we will disconnect it.

We remove the five Phillips screws (PH # 00) that hold the shield that covers the connectors, and with the help of a flat tool we will disconnect the connectors from the screen, and we can now remove the one that we have to replace and place the new one from which Let's dispose instead.