With a SIM extraction tool we remove the SIM tray,

We unhook the back cover and remove it.

Unscrew the Phillips screws (PH # 00) that hold the intermediate housing and remove it.

Unscrew the Phillips screws (PH # 00) that hold the antenna and speaker module, unhook it and remove it.

We apply heat on the screen for two minutes at eighty degrees.

We introduce a metal spike between the central housing and the screen. We exchanged it with a plastic spike to avoid scratching the housing.

We perform the entire outline until the screen is completely detached.

We disconnect the flex from the screen, from the auxiliary plate and the flex from the screen of the motherboard. We remove the screen.