We will start by removing the back cover. To do this, we will introduce the tool between the housing and the frame and, by leveraging, we will release the notches that hold it.

We will remove the battery before removing the intermediate housing. For this we will leverage with the opening tool.

First we remove the twelve screws that hold the intermediate casing. Then, with the opening tool, we will leverage to release the notches that hold it.

In this step we will disconnect the components connected to the board to be able to remove it later. We disconnect the flex from the digitizer, the front camera and the display.

First we remove the screw that holds the plate to the chassis. Then, we will lift it from the top to be able to disconnect the connection flex with the auxiliary plate and the coaxial antenna cable.

We will find the front camera fitted in the upper right part of the chassis. To remove it, first remove the holding pad and then disengage the camera.