We start by removing the SIM / SD tray so that the rear case can be removed later.

With an opening tool, we will leverage to disengage the chassis housing. Then we will disconnect the fingerprint reader to be able to separate it.

We took out the six Phillips screws (PH # 00) that hold the connector shield and the internal upper casing to be able to remove them.

Now we disconnect the coaxial cable, the interconnection flex, the battery, the screen, the flex of side buttons, the front camera and the proximity sensor.

We remove the Phillips screw (PH # 00) that holds the motherboard and unlock it.

In this step we remove the remaining components that are still in the chassis.

To finish, we remove the auxiliary plate, the vibrator and the interconnection flex. Now we can replace all the components in the new screen.