We start by removing the back cover. To do this, we will heat it to soften the adhesive and thus detach it more easily.

Disconnect the fingerprint reader and remove the ten Phillips screws (PH # 00) that hold the inner case to be able to disengage it.

In this step we remove the handset and disconnect the coaxial cables, the front cameras, the interconnection flex, the battery, the proximity sensor and the flex of the screen.

Remove the two Phillips screws (PH # 00) that hold the plate and also the SIM / SD tray. Now we can undo the motherboard.

To finish, we remove the rubber that covers the hollow of the pulsadores and later we remove the metal support to release the keys.