Before starting make sure the phone is switched off.
Step 2 Opening
Remove the back cover with the opening tool, this will avoid scratching the case.
Step 3
Remove the battery by pulling on the bottom.
Step 4 MicroSD card
Remove the microSD card.
Step 5 SIM cards
Remove the SIM card (s).
Step 6 Screws
Remove the 13 Phillips screws that hold the housing. Including the one hidden behind the letter "W".
Step 7 Intermediate housing
Disassemble the intermediate casing, loosening the plastic tabs located around the contour.
Step 8 Rear camera
Disconnect the camera from the motherboard. To do this, pull the connector tab and gently pull the flex.
Step 9
Take off and remove the rear camera.
Step 10
Disconnect the coaxial antenna cable at the end of the motherboard.
Step 11 Touch screen flex.
Disconnect the flex from the touch screen on the motherboard. To do this, pull the connector tab and gently pull the cable.
Step 12 Bottom flex and LCD.
Unplug the lower flex and the one from the LCD display.
Step 13 Flex volume controls
Peel off the volume button flex to remove it next to the motherboard.
Step 14 Flex button power.
Take off also, the flex of the power button.
Step 15 Motherboard
Remove the 2 Phillips screws that hold the motherboard.
Step 16
Peel off the vibrator to remove it next to the motherboard.
Step 17 Front camera
Remove the adhesive covering the camera connector.
Activate the connector tab.
Step 18
Finally pull the camera gently to remove it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.