Wiko Rainbow - Antenna bottom plate

Guide with all the necessary steps so that you can change the lower antenna plate of the Wiko Rainbow yourself.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 Wiko Rainbow

CHARACTERISTICS
SYSTEM: Android 4.2.2 Jelly Bean
SCREEN: 5 inches, LCD, 1280 x 720 pixels, 294 ppi
PROCESSOR: MediaTekMT, 4 cores, 1.3 GHz
RAM: 1024 MB
INTERNAL MEMORY: 4 GB + microSD
BATTERY: 2000 mAh
CAMERA: 8 MP / 2 MP
CONNECTIVITY: HSPA, Bluetooth 4.0
DIMENSIONS: 146 x 74 x 9.3 mm
WEIGHT: 167 gr

Before starting, make sure that the mobile is turned off.

Step 2 Back cover

Starting from the small notch in the upper right corner, disassemble the back cover.

Step 3

Once the top part is released, the rest of the lid will come out easily.

Step 4 Battery

Remove the battery by pulling on the bottom.

Step 5 SIM and microSD cards

Remove the SIM and micro SD cards.

Step 6 Intermediate housing

Remove the 10 Phillips screws that hold the middle housing.

Note that one of the screws is covered by a white sticker.

Step 7

Use a flat plastic tool to disassemble the intermediate housing.

Step 8

Separate the intermediate housing.

Step 9 Antenna bottom plate

Disconnect the lower end of the antenna coaxial cable.

Step 10

Finally, take off the lower antenna plate with the metal spatula.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial